Analisis Pemeliharaan Perawatan Mesin Pilling Menggunakan Metode RCM, FMEA dan LTA
DOI:
https://doi.org/10.63822/veh4pq37Keywords:
RCM, LTA, FMEA, MaitenanceAbstract
This study aims to apply Reliability Centered Maintenance (RCM), Failure Mode and Effect Analysis (FMEA), and Logic Tree Analysis (LTA) methods to improve pilling machine performance at PT. Amak Firdaus Utomo. Through this systematic approach, the long and cross cutter components were identified as having the highest priority, with a value of 243, a failure frequency of 24 times, and a total downtime of 580 minutes. These components are categorized as having power outages, are critical, and represent the primary failure mode, thus requiring special attention in their maintenance strategy. Based on the analysis, a preventive maintenance strategy was established for the high-priority components, while other components were subject to condition-based maintenance. The application of this method has proven to produce a more optimal and efficient maintenance strategy, while supporting the overall resolution and performance of the pilling machine.
References
Akbar, M. R., & Widiasih, W. (2022). Analisis Perawatan Mesin Bubut dengan Metode Preventive Maintenance Guna Menghindari Kerusakan Secara Mendadak dan Untuk Menghitung Biaya Perawatan. Jurnal SENOPATI : Sustainability, Ergonomics, Optimization, and Application of Industrial Engineering, 4(1), 32–45. https://doi.org/10.31284/j.senopati.2022.v4i1.3086
Alamsyah, M. R. N., & Widiasih, W. (2023). Analisis Komponen Kritis dan Penjadwalan Perawatan Mesin Inject Molding Dengan Metode FMEA Pada PT. ANGKADA RAYA. JISO : Journal of Industrial and Systems Optimization, 6(1), 17. https://doi.org/10.51804/jiso.v6i1.17-24
Armanda, D. D., Jufriyanto, Moh., & Rizqi, A. W. (2023). Perencanaan Perawatan Mesin dengan Metode Reliability Centered Maintenance (RCM) Pada PT. XYZ. G-Tech: Jurnal Teknologi Terapan, 7(4), 1588–1595. https://doi.org/10.33379/gtech.v7i4.3298
Hidayat, H., & Rohmat, R. (2022). Analisis Kerusakan Jembatan Timbang Unit 1 di PT. IGLAS GRESIK Dengan Menggunakan Metode FMEA dan LTA. JUSTI (Jurnal Sistem dan Teknik Industri), 3(1), 106. https://doi.org/10.30587/justicb.v3i1.4757
Kurniawan, D., Haryono, H., & Prihatiningsih, T. (2021). Perbaikan Perawatan Mesin Rotary Lathe dengan Metode Reliability Centered Maintenance (RCM) Menggunakan Pendekatan Overall Equipment Effectiveness (OEE). Jurnal SENOPATI : Sustainability, Ergonomics, Optimization, and Application of Industrial Engineering, 2(2), 82–91. https://doi.org/10.31284/j.senopati.2021.v2i2.1488
Lolita Pattiapon, M. (2024). Analisis Perawatan Mesin Cetak Paving block DI UD. X Dengan Pendekatan Reliability Centered Maintenance dan Maintenance Value Stream Mapping. Industri Inovatif : Jurnal Teknik Industri, 14(1), 22–30. https://doi.org/10.36040/industri.v14i1.7264
Prastiawan, A., Rarindo, H., Hendry, E., & Amrullah, U. S. (2021). Metode RCM Untuk Sistem Perawatan Mesin Amplas Multipleks Pada PABRIK PLYWOOD. 15(2).
Raharja, I. P., Suardika, I. B., & Galuh W, H. (2021). Analisis Sistem Perawatan Mesin Bubut Menggunakan Metode RCM (Reliability Centered Maintenance) DI CV. JAYA PERKASA TEKNIK. Industri Inovatif : Jurnal Teknik Industri, 11(1), 39–48. https://doi.org/10.36040/industri.v11i1.3414
Rizani, M. K. (2021). Analisis Preventive Maintenance Mesin Extrusion Dengan Metode Reliability Centered Maintenance II (RCM II) (Studi Kasus di PT. Lumina Packaging. Sidoarjo, jawa timur). JISO : Journal of Industrial and Systems Optimization, 4(1), 20. https://doi.org/10.51804/jiso.v4i1.20-29
Rohmat, R. (2022). Aanlisis Perawatan Mesin Conveyor Dengan Metode Reliability Centered Maintenance (RCM). JUSTI (Jurnal Sistem dan Teknik Industri), 3(1), 145. https://doi.org/10.30587/justicb.v3i1.4761
Silviana, N., Munte, S., Siregar, N., & Prasetyo, H. (2021). Analisis Perawatan Mesin Produksi Menggunakan Metode RCM (Realibility Centered Maintenance) Pada Mesin Mixer Di PT. X.
Simanungkalit, R. M., Suliawati, S., & Hernawati, T. (2023). Analisis Penerapan Sistem Perawatan dengan Menggunakan Metode Reliability Centered Maintenance (RCM) pada Cement Mill Type Tube Mill di PT Cemindo Gemilang Medan. Blend Sains Jurnal Teknik, 2(1), 72–83. https://doi.org/10.56211/blendsains.v2i1.199
Supriyadi, S., Jannah, R. M., & Syarifuddin, R. (2018). Perancangan Pemeliharaan Mesin Centrifugal Dengan Menggunakan Metode Reliability Centered Maintenance Pada Perusahaan GULA RAFINASI.
Surya Andiyanto, Agung Sutrisno, & Charles Punuhsingon. (2017). Penerapan metode FMEA (Failure Mode and Effect Analysis) untuk Kuantifikasi dan pencegahan resiko akibat terjadinya lean waste.
Syahabuddin, A. (2019). Analisis Perawatan Mesin Bubut CY-L1640G Dengan Metode Reliability Centered Maintenance (RCM) DI PT. POLYMINDO PERMATA. JITMI (Jurnal Ilmiah Teknik dan Manajemen Industri), 2(1), 27. https://doi.org/10.32493/jitmi.v2i1.y2019.p27-36
Downloads
Published
Issue
Section
License
Copyright (c) 2026 Anisa Rahmawati, Yustina Suhandini Tjahjaningsih, Mustakim Mustakim, Tri Prihatiningsih, Aries Budi Wijayanto (Author)
This work is licensed under a Creative Commons Attribution-NonCommercial-ShareAlike 4.0 International License.
