Analisis Pengendalian Kualitas untuk Mengurangi Produk NG Menggunakan QC Seven Tools pada Proses Produksi Injection Molding di Perusahaan Otomotif di Indonesia
DOI:
https://doi.org/10.63822/9ehyd045Keywords:
Quality Control, QC Seven Tools, Injection Molding, Defect Product, Quality ImprovementAbstract
Quality control is an important aspect of maintaining product quality in the manufacturing industry. A high number of defective or Not Good (NG) products can lead to increased production costs as well as decreased efficiency and customer satisfaction. Therefore, an appropriate analysis is needed to identify and reduce the defect rate in the production process. This study aims to analyze quality control efforts in reducing NG products in the injection molding process at an automotive company in Indonesia using the QC Seven Tools method. The data used consisted of 22 days of production data with a total production output of 7,700 pcs and 835 defective products, resulting in a defect rate of 10.84%. The results of the study indicate that the dominant defects are burry (42%) and scratch (30%), which contribute 72% of the total defects. The main causes originate from human and machine factors. The production process is still under control; however, there are variations that need attention. The implementation of QC Seven Tools proved effective in identifying the causes of defects and providing improvement recommendations to enhance product quality.
References
American Society for Quality. (2020). Quality control handbook. ASQ Press.
Deming, W. E. (1986). Out of the crisis. MIT Press.
Devani, V., & Wahyuni, D. (2017). Pengendalian kualitas menggunakan QC Seven Tools untuk mengurangi produk cacat. Jurnal Teknik Industri, 18(2), 45–53.
Evans, J. R., & Lindsay, W. M. (2017). Managing for quality and performance excellence (10th ed.). Cengage Learning.
Gaspersz, V. (2005). Total quality management. PT Gramedia Pustaka Utama.
Goetsch, D. L., & Davis, S. B. (2016). Quality management for organizational excellence: Introduction to total quality (8th ed.). Pearson.
Heizer, J., & Render, B. (2015). Operations management (11th ed.). Pearson Education.
International Organization for Standardization. (2015). ISO 9001:2015 quality management systems—Requirements. ISO.
Ishikawa, K. (1985). What is total quality control? The Japanese way. Prentice Hall.
Juran, J. M. (1999). Juran's quality handbook (5th ed.). McGraw-Hill.
Montgomery, D. C. (2013). Introduction to statistical quality control (7th ed.). John Wiley & Sons.
Nasution, M. N. (2015). Manajemen mutu terpadu. Ghalia Indonesia.
Oakland, J. S. (2014). Total quality management and operational excellence: Text with cases (4th ed.). Routledge.
Putra, D., & Santoso, B. (2019). Penerapan statistical quality control untuk menekan defect pada industri manufaktur. Jurnal Manajemen Industri, 10(3), 101–110.
Sari, R., & Prasetyo, A. (2020). Analisis pengendalian kualitas pada proses injection molding menggunakan metode QC Seven Tools. Jurnal Rekayasa Industri, 12(1), 23–30.
Downloads
Published
Issue
Section
License
Copyright (c) 2026 Yusup Purnomo, Rismawati Pebriani, Ikhsan Dwi Nugroho, Vicky Adni Firmansyah, Yudi Prastyo (Author)
This work is licensed under a Creative Commons Attribution-NonCommercial-ShareAlike 4.0 International License.
