Analisis Efisiensi Proses Drafting 2D Dies pada Empat Proses Dies Menggunakan Metode Diagram Fishbone melalui Integrasi Siemens NX 7.5
DOI:
https://doi.org/10.63822/fskne577Keywords:
Dies Drafting, Siemens NX 7.5, Fishbone Diagram, Process EfficiencyAbstract
The 2D dies drafting process in the manufacturing industry plays an important role in supporting tooling dies production. A common problem encountered is the use of different software platforms between Siemens NX for 3D modeling and AutoCAD for 2D drafting, resulting in longer processing times, potential data inconsistencies, and increased file storage requirements. This study aims to analyze the improvement of 2D dies drafting efficiency through full integration using Siemens NX 7.5. The method used in this research is the fishbone diagram method to identify the root causes of the problems. The research object involved four dies processes, with an initial average drafting time of 36 hours, which was reduced to 16 hours after implementation. The results showed an efficiency improvement of 55.6%, a reduction in the potential for data synchronization errors, and a decrease in additional software usage costs. The implementation of drafting standards, NX templates, work instructions, and internal training became the main factors contributing to the success of this improvement.
References
American Society of Mechanical Engineers. (2023). ASME Y14.5-2018: Dimensioning and tolerancing. ASME International.
AutoCAD Software User Guide. (2020). AutoCAD 2020: Getting started with 2D drafting. Autodesk Inc.
Ishikawa, K. (1985). What is total quality control? The Japanese way. Prentice-Hall. (Untuk konsep Diagram Fishbone/Ishikawa)
ISO. (2009). ISO 128-24:2009 Technical drawings — General principles of presentation — Part 24: Basis for presentation of product definitions on drawings using computer-aided design (CAD) systems. International Organization for Standardization.
Ko, S. H., & Lee, S. B. (2019). Computer-aided design and manufacturing (CAD/CAM): Principles and applications. McGraw-Hill Education.
Siemens Digital Industries Software. (2010). Siemens NX 7.5: Drafting application guide. Siemens AG.
Siemens Digital Industries Software. (2025). NX CAD buyer's guide: Hardware specs and module extensions. Diakses dari https://www.siemens.com/en-us/products/designcenter/nx-cad-software/buyers-guide/
Smith, J. A., & Brown, R. T. (2018). Work instructions in manufacturing: Best practices for standardization and quality control. Journal of Manufacturing Systems, 45(3), 112–125.
Wibowo, A., & Pratama, K. (2022). Integrasi model 3D dan drafting 2D pada industri tooling dies: Studi kasus eksport-import data. Jurnal Teknik Industri, 14(2), 89–98.
Adhyatama Training. (2024). Design tooling stamping dies pada manufaktur otomotif.
Studi kasus analisis defect pada komponen otomotif disertai pemecahan masalah menggunakan diagram Pareto dan Fishbone
Faisal, S., & Setyoadi, Y. (2019). Proses drawing bending dies bracket bolster Isuzu Traga. Jurnal SENS4, 1(1)
Hery Prawidhi. (2009). Perancangan dies embossing [Tugas akhir, Institut Teknologi Bandung]. Digilib ITB.
A Setiawan, A Deswita, S Shofiyaturrahmah, FB Firmansyah, Y Prastyo
Jurnal Ilmiah Research Student 2 (2), 53-63
Analysis of the causes of production process failure with the Fishbone diagram method and implementation of TQM to improve product quality in the manufacturing industry of PT …
JT Aqilah, R Amelia, E Prasetyo, D Boimau, R Fadli, Y Prastyo
Downloads
Published
Issue
Section
License
Copyright (c) 2026 Avifan Septianto, Rafli Alfandi, Muhammad Iqbal, Akmal Arfie, Yudi Prasetyo (Author)
This work is licensed under a Creative Commons Attribution-NonCommercial-ShareAlike 4.0 International License.
