Komparasi Kinerja Konfigurasi Kombinasi dan Single Rod Guide Berdasarkan Data Historis Gross Production pada Sumur J di Sumur Ral Lapangan Aura
DOI:
https://doi.org/10.63822/0g2hvc65Keywords:
Rod Guide, Hydraulic Pumping Unit, Failure Rate, Average Gross, Production Slope.Abstract
J-type deviation wells that use a Sucker Rod Pump (SRP) system with a Hydraulic Pumping Unit (HPU) are prone to friction between the sucker rod and the tubing,which can affect production performance. This study aims to compare the gross production characteristics of the combined configurations of a single double rod guide and a single rod guide, using historical production data from the J well in the Aura Field. The analysis was conducted quantitatively based on data on production, well trajectory and workover, using the parameters of average gross production and production slope. The results of the study show that the combined configuration yielded an average gross production of 312.11 BFPD and a slope of −1.016 BFPD/day, whilst the singlerod guide configuration yielded 210.93 BFPD and a slope of −1.730 BFPD/day. These results indicate that the combined configuration is capable of maintaining a higher production rate with a slower decline rate, making it more effective in maintaining production stability in wells with similar characteristics.
References
administrator,+3.1989-39-51.pdf. (n.d.).
Afifah, R. S., Manik, N., & Randanan, E. C. (2022). EVALUASI DESAIN SUCKER ROD PUMP ( SRP ) PADA SUMUR " ANDY98 " LAPANGAN " PA ". 2(4), 721–727. https://doi.org/10.53866/jimi.v2i4.112
Aisyiah, E. A., & Nirmala, G. S. (2025). EVALUASI POTENSI PRODUKSI SUMUR BERDASARKAN INFLOW PERFORMANCE RELATIONSHIP PADA SUCKER ROD PUMP. 5(November), 1174–1180.
Azmi, I. M., Jatisukamto, G., & Sutjahjono, H. (2020). Pengaruh Type Rod dan Efisiensi Volumetrik terhadap Kinerja Pompa Beam. 4(2), 1–8.
Dan, E., Sucker, O., Pump, R. O. D., Tipe, D., Pada, H., & Lapangan, S. A.-. (2024). 113 | P a g e. 2, 113–120.
Dewanto, M. E. (2024). Jurnal Ilmu Ekonomi ( JIE ). 7(02), 195–210.
E, P. P. T. M. (2022). “ Analysis Of Oil Production In Production Wells PT . Medco. 1(1), 46–52.
Erlangga, H., Sakti, B., Amri, S., & Nursanto, E. (2024). Aplikasi Regresi Linier Untuk Menentukan Perkiraan Produksi Gas di Struktur Musi Barat Tahun 2014 Hingga 2024 PT Pertamina EP Asset 2 Field Pendopo. (2012), 275–279.
Febriyanti, E., Suhadi, A., & Sari, L. N. (n.d.). ANALISA KEGAGALAN POLISHED ROD PADA POMPA ANGGUK FAILURE ANALYSIS OF POLISHED ROD IN SUCKER ROD PUMP. (April 2019).
Indriani, E., Nurul, S., & Rasako, S. (2024). Evaluasi Penggantian Artificial Lift Sucker Rod Pump ( SRP ) Menjadi Electrical Submersible Pump ( ESP ) Untuk Meningkatkan Produksi Minyak Sumur S Lapangan Kawengan. 58(3), 163–171.
Lapangan, S. I.-, & Akar, T. (2019). DAMAGE ANALYSIS OF SUCKER ROD STRING DUE TO EXCEEDS STRESS ON ARTIFICIAL LIFT SUCKER ROD PUMP WELL IR-01 TALANG AKAR PENDOPO FIELD. 2(02). https://doi.org/10.25299/rem.2019.vol2(02).3542
November, I., & Soesanto, E. (2024). Jurnal Bhara Petro Energi Analisa Trajectory Directional Drilling Pada Sumur Berarah MST-01. 3(2), 1–12.
November, I., & Walisyah, D. (2025). Jurnal Bhara Petro Energi Perancangan Profile Sumur Directional Drilling Berdasarkan Analisa Beban Drillstring Pada Sumur X Lapangan Y. 4(2), 1–6.
Pasanea, H. C., Untoro, E., Lekatompessy, R. R., Mesin, T., & Negeri, P. (2025). Journal Mechanical Engineering ( JME ). OPTIMASI PRODUKSI SUCKER ROD PUMP PADA SUMUR HCP. 3(1), 10–15.
Pertamina, P. T., & Field, E. P. (2025). EVALUASI KINERJA SUCKER ROD PUMP DI SUMUR SWO. 5(November).
Putra, A., Zaira, J. Y., Ma, M., & Wijianto, A. (2025). Jurnal Mekanik Terapan Pengaruh Dimensi Seesaw dan Kecepatan Rotasi terhadap Kinerja Sucker Rod Pump Dengan Studi Simulasi. 06(01), 33–42. https://doi.org/10.32722/jmt.v6i1.7449
Sarolangun-jambi, K., Sopwan, I., Nata, A. S., & Supriatso, A. (2017). Evaluasi dan Optimasi Produksi Sucker Rod Pump Dengan Penggerak Tipe Hydraulic Pumping Unit di KSO Pertamina-EP Samudra Energy BWP Meruap.
Sumur, Z., Sumur, F., Sumur, D. A. N., Nawasena, M. L., Pertamina, P. T., & Rokan, H. (2024). EVALUASI DAN OPTIMASI SUCKER ROD PUMP ( SRP ). 14(2), 97–113.
Suryakusuma, K. A. (2020). Drillstring Design Untuk Directional Drilling Pada Sumur X Lapangan Y. 10(1).
Tahun, A. (2023). Journal Mechanical Engineering (JME). 1(2), 70–80.
Tamang, C. G., Manalo, A., Burey, P. P., Ferdous, W., Shelley, T., Patel, M., & Chapman, T. (2025). Composite Polymeric Sucker Rod Guides : State-of-Practice , Causes of Failure , and Circular Economy Opportunities.
Vol, J., Fitrianti, N., & Haryono, A. (n.d.). Issn 2540 - 9352. 7(1).
Ym, D. L. (2025). Evaluasi Lifting Efficiency Pompa Angguk Pada Sumur RFD. 3(2), 3–6.
Downloads
Published
Issue
Section
License
Copyright (c) 2026 Rama Arya Lingara, Abdul Gafar Karim, Eka Megawati, Aici Ichtiarizak Machrifah, Nijusiho Manik (Author)
This work is licensed under a Creative Commons Attribution-NonCommercial-ShareAlike 4.0 International License.
