Analisis Efisiensi Lini Produksi Perakitan Becak Listrik Menggunakan Metode DMAIC dan Ranked Positional Weight (RPW)
DOI:
https://doi.org/10.63822/7rek5w23Keywords:
Line Balancing; DMAIC; Ranked Positional Weight; Electric Pedicab; Production Efficiency.Abstract
This study aims to analyze the production line efficiency of electric pedicab assembly using the DMAIC (Define, Measure, Analyze, Improve, Control) method combined with the Ranked Positional Weight (RPW) method. The electric pedicab assembly line experiences imbalance issues characterized by bottleneck conditions and high idle time at several workstations. The DMAIC method is used to systematically identify problems, measure performance, analyze root causes, implement improvements, and control the results. The RPW method is applied to balance the production line by distributing work elements to workstations based on positional weight and precedence constraints. The results show that the integration of DMAIC and RPW methods can reduce idle time, eliminate bottlenecks, and increase production line efficiency. This combination provides a more systematic and optimal solution compared to using a single method. The research contributes to filling the gap in previous studies that have not specifically combined DMAIC with RPW in the context of electric vehicle assembly.
References
Adifqi, R. (2024). Analisis Line Balancing untuk Meningkatkan Efisiensi Lintasan Produksi. Jurnal Teknik Industri, 12(2), 45-56.
Assauri, S. (2011). Manajemen Produksi dan Operasi. Jakarta: LPFE Universitas Indonesia.
Baudin, M. (2020). Lean Production Simplified: A Plain-Language Guide to the Most Powerful Production System Ever Known. New York: Productivity Press.
Cahyaa, R. (2024). Analisis Sistem Produksi pada Industri Manufaktur. Jurnal Manajemen Industri, 8(1), 23-34.
Daniallabib, A., & Apsari, D. (2024). Penerapan FMEA dalam Pengendalian Kualitas. Jurnal Kualitas Produk, 5(2), 112-125.
Dewi, S., & Fitrillia, R. (2024). Proses Produksi AMDK dan Pengendalian Kualitas. Jurnal Teknologi Pangan, 10(1), 67-78.
Gaspersz, V. (2004). Production Planning and Inventory Control. Jakarta: Gramedia Pustaka Utama.
Hartini, S. (2022). Lean Manufacturing dan Eliminasi Waste. Jurnal Teknik Industri, 15(3), 89-102.
Hartanti, R., et al. (2022). Integrasi Lean Manufacturing dan FMEA. Jurnal Manajemen Operasi, 7(2), 134-148.
Heizer, J., Render, B., & Munson, C. (2017). Operations Management: Sustainability and Supply Chain Management. London: Pearson Education.
I Ketut Wirjayati. (2025). Analisis Risiko dengan FMEA. Jurnal Rekayasa Sistem Industri, 9(1), 45-58.
Nofita Sari. (2018). Line Balancing untuk Meningkatkan Efisiensi Produksi. Jurnal Teknik Industri, 11(2), 78-89.
Pratiwi, D., et al. (2024). Analisis Efisiensi Produksi dengan Metode RPW. Jurnal Teknik Industri, 13(1), 34-47.
Rianto, A. (2009). Analisis Bottleneck pada Lini Produksi. Jurnal Manajemen Industri, 6(2), 56-67.
Rifka Alkhilyatul Ma'rifat, & I Made Suraharta. (2024). Fishbone Diagram untuk Analisis Akar Permasalahan. Jurnal Kualitas, 8(1), 23-35.
Suyatno. (2025). Line Balancing dan Efisiensi Lini Produksi. Jurnal Teknik Industri, 14(2), 90-103.
Suradi. (2022). Sistem Produksi dan Manajemen Operasi. Bandung: Penerbit ITB.
Trenggonowati, T., & Febriana, R. (2019). Peningkatan Produktivitas pada Proses Produksi. Jurnal Teknik Industri, 10(3), 112-125.
Ulfia, N. (2024). Pengendalian Kualitas dengan FMEA. Jurnal Manajemen Mutu, 6(1), 34-47.
Wignsoebroto, S. (2003). Studi Waktu dan Gerakan. Surabaya: Guna Widya.
Witriani, D., & Prasinta, W. R. (2026). Value Stream Mapping untuk Identifikasi Waste. Jurnal Teknik Industri,
Downloads
Published
Issue
Section
License
Copyright (c) 2026 Asep Setiawan, Abdul Rojak, Widya Retno Prasinta, Anwar Samsa (Author)
This work is licensed under a Creative Commons Attribution-NonCommercial-ShareAlike 4.0 International License.
